Removed Floating point math

[ShuzzDE]

I modified the portions of the code using float math.
Rewriting it to use (unsigned) longs instead makes the resulting binary around 500 Bytes smaller.
While this may not seem much on most Arduinos, it really does make a difference when compiling for things like e.g. a DigiSpark or directly for other ATtiny controllers.

Code was tested on Arduino Uno and Digispark. No problems found.

[batizisanya]

With theese changes i get -2.

[ShuzzDE]

-2?
Sorry, I don't understand what you mean...

[batizisanya]

capacitiveSensor and capacitiveSensorRaw will return -2 if the methods timeout. This is caused by the count exceeding the value of CS_Timeout_Millis, which is set at a default value of 2000 milliseconds (2 seconds). This is most often caused by a missing resistor or the resistor in the wrong pin. It could also be caused by a sensor that is grounded or connected to +5 V. (http://playground.arduino.cc/Main/CapacitiveSensor)

I tried first with the original lib (that worked), then tried the modified lib with your changes and i got -2 (timeout)

[ShuzzDE]

Ah, ok, I see.
Has not happened during my testing and the code is running in several projects around my home.
Are you sure it's not a coincidental hardware issue?

If so, maybe I overlooked something. Can you maybe post your code so I can get a better idea of what might be going wrong?