diff --git a/firmware-2712/latest/pieeprom-2025-11-21.bin b/firmware-2712/latest/pieeprom-2025-11-21.bin
new file mode 100644
index 0000000..b3a62d8
Binary files /dev/null and b/firmware-2712/latest/pieeprom-2025-11-21.bin differ
diff --git a/firmware-2712/latest/recovery.bin b/firmware-2712/latest/recovery.bin
index 7c6c9ae..a751e92 100644
Binary files a/firmware-2712/latest/recovery.bin and b/firmware-2712/latest/recovery.bin differ
diff --git a/firmware-2712/release-notes.md b/firmware-2712/release-notes.md
index c8da3f8..e491e14 100644
--- a/firmware-2712/release-notes.md
+++ b/firmware-2712/release-notes.md
@@ -1,5 +1,23 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+## 2025-11-21: Allow longer overlay file paths (latest)
+
+* recovery: Restore recovery_wait option
+  Restore the recovery_wait config.txt option. If this option is set
+  then recovery.bin will not rename itself or reboot. Instead flash
+  the activity LED on completion.
+  This option can be useful when creating an SD card to erase the
+  EEPROM or program the RPIBOOT gpio on multiple devices.
+  If recovery_wait=1 and recovery.bin is run from the SD card then
+  indicate success of erase_eeprom=1 or program_rpiboot_gpio=N was
+  set instead of requiring the EEPROM to be updated.
+* Load RP1 firmware whilst DDR is initialising
+* Allow longer overlay file paths
+  load_dtoverlay uses the variable "filename" to hold the full path to an
+  overlay. As such it should be declared using LDFILEPATH_MAX, not
+  LDFILENAME_MAX.
+  See: https://github.com/raspberrypi/firmware/issues/2004
+
 ## 2025-11-09: Promote 2025-11-05 to the default release (default)
 
 ## 2025-11-05: arm_loader: Add iommu_dma_numa_policy=interleave when needed (latest)