Welcome to EOS_connect Discussions!

[ohAnd]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[MatzeBu]

Hi,
EOS connect help me to use EOS. Thank you very much for your work and also for EOS.
I have a Sungrow inverter, 12,8kwh battery (also sungrow), 9,2kwp PV, a wallbox from cfos with evcc and two electric cars.
In the next time there will be a hot water heatpump.

I have Tibber and hope to optimize all these Things. I also use Home Assistent at a Raspberry pi 4 8gb.

[ohAnd]

Hi @MatzeBu ,

thanks for the feedback and nice to hear that EOS connect is also running IN your setup and so IS running your installation ;-) .

It could be helpful if you could explain for others how you managed your integration of EOS connect and EOS together with an external Inverter/ Battery.

It would be nice if you could open here https://github.com/ohAnd/EOS_connect/discussions/categories/installation-configuration a thread to explain in short steps the "integration of a SUNGROW inverter / battery with EOS connect and EOS...

Thanks in advance ;-)

PS: Maybe we can open another discussion thread to collect runtimes of optimization runs on different hardware - on my side a Raspbery Pi 5 8 GB needs about 2 mins for that. Maybe based on that there are more application performance optimizations reachable.

PPS: Extend the optimization for things like heatpump is also in plan ...

[MatzeBu]

At the moment EOS is working for the first days and only in display mode. If there is the time i have to write some automations to bring it to active work.

PS: I'm from Germany, such an explanation for sungrow is also in german OK, or isn't?

[stefanriegel]

it will help me also if you can explain your setup, have to Implement my Victron ESS and Huawei SUN2000 Setup :)

[WolfImBusch]

Hi,

please correct me but with implementing

#12

a lot of other inverters/batteries should be supported instantly?!?