How to Firmware Update OTA - Seeed Studio Sensecap Solar Node p1-pro ?

[dd6ds]

Hi,
if login via Manage and start cmd run start ota
can See a Bluetooth Device.

But when try the WebAPP on Linux + Chromium Browser got the error that Platform is not supported
and at my old iPhone with Safari Browser also (ohter link).

How can I Update the Firmware without physical access to the Repeater ?

Thanks

[446564]

you need to use nrf dfu updated to flash the firmware once the repeater is in OTA mode, you need to be within bluetooth range

https://www.nordicsemi.com/Products/Development-tools/nRF-Device-Firmware-Update

[dd6ds]

@446564

Thanks!

0. check accu State: it was 90%

1. In Meshcore APP: Manage -> start cmd
   start ota ( white LED is blinking )

2. download the FW File: sensecap_solar_repeater-v1.12.0-e738a74.zip from github

3. start the APP on Smartphone: nRF Device Firmware Update

4. select File: sensecap_solar_repeater-v1.12.0-e738a74.zip
   Select Bluetooth Device: SENSCAP_SOLAR_OTA
   click Upload

   Bootloader enablement green
   DFU initialiastion green
   Firmwareupload red

Not able to connect via MeshCore APP again.
How to get it back without physical Access to repeater ?

SENSCAP_SOLAR_OTA no longer active bluetooth

No LED is on at the Sensecap Solar Node

[dd6ds]

Did not found a OTA solution

Did get the Repeater down and upload the UF2 file via USB.

But how to do this without get the repeater down for Firmware Update ?

[446564]

Before deploying an nrf based repeater it is a good idea to install this bootloader first.

https://github.com/oltaco/Adafruit_nRF52_Bootloader_OTAFIX

There are some tips about app settings as well.