Armed issues Inav 8.0 Speedy bee 450 wing

[anderssvenson2011]

Hi, I have tried to program Speedy bee 450 wing but could not get the motors to work. Got error message similar to "Armed not possible, hardware failure" tried all possible changes but gave up. Changed from Inav 8.0 to 7.12 then it worked. Any comment?

[sensei-hacker]

The most common cause of what you experienced is when people accidentally flash not quite the right target. For example, flashing the SpeedyBee F405, Speedybee F405V3, or SpeedybeeF405Mini instead of SpeedyBeeF405Wing.

Doing Mini instead of Wing is probably the most common this month.

At the top of Configurator there are colored icons showing the health of each hardware sensor. The same information is available in the output of "status". If the gyro and accelerometer health is bad, you have the wrong target.

[anderssvenson2011]

Hi thanks for reply, I used this; 8.0.0 speedybeef405wing-2025-1-21-17-43 and inav 8.0 Anders Den mån 24 mars 2025 kl 17:05 skrev Sensei ***@***.***>:

…

The most common cause of what you experienced is when people accidentally flash not quite the right target. For example, flashing the SpeedyBee F405, Speedybee F405V3, or SpeedybeeF405Mini instead of SpeedyBeeF405Wing. Doing Mini instead of Wing is probably the most common this month. At the top of Configurator there are colored icons showing the health of each hardware sensor. The same information is available in the output of "status". If the gyro and accelerometer health is bad, you have the wrong target. — Reply to this email directly, view it on GitHub <#10777 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AP3HG5VEYRYNZMFV2ABO6ZL2WAULVAVCNFSM6AAAAABZUO4XOKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENRQGQ2DIMQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

-- Anders Svenson Köpingevägen 33 64751 Åkers Styckebruk 0703961713

[sensei-hacker]

Can you show a screenshot, with the top half of Configurator?
Also the output of "status" might be interesting.

[anderssvenson2011]

I have reflashed to 7.12 on both my speedy bee 450 Wing but, down right in the field it notes, due to Hardware failure not able to arm.

[sensei-hacker]

I have reflashed to 7.12 on both my speedy bee 450 Wing but, down right in the field it notes, due to Hardware failure not able to arm.

Can you show a screenshot, with the top half of Configurator?
Also the output of "status" might be interesting.