Build Swoole

支持推送到 CNB #426

Re-run triggered October 30, 2025 12:58

limingxinleo

985869a

build

Status Cancelled

Total duration 31m 6s

Artifacts –

build-swoole.yml

on: push

Matrix: build

Annotations

45 errors and 34 warnings

Build PHP 8.3 Alpine 3.19

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.18

buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c set -ex && apk update && apk add --no-cache libstdc++ openssl git bash c-ares-dev libpq-dev php82-pdo_pgsql php82-pdo_sqlite php82-pdo_odbc && apk add --no-cache --virtual .build-deps $PHPIZE_DEPS unixodbc-dev sqlite-dev && cd /tmp && curl -SL \"https://github.com/swoole/swoole-src/archive/${SW_VERSION}.tar.gz\" -o swoole.tar.gz && ls -alh && cd /tmp && mkdir -p swoole && tar -xf swoole.tar.gz -C swoole --strip-components=1 && ln -s /usr/bin/phpize${PHP_BUILD_VERSION} /usr/local/bin/phpize && ln -s /usr/bin/php-config${PHP_BUILD_VERSION} /usr/local/bin/php-config && ( cd swoole && phpize && ./configure --enable-openssl --enable-swoole-curl --enable-cares --enable-swoole-pgsql --enable-swoole-sqlite --with-swoole-odbc=unixodbc,/usr && make -s -j$(nproc) && make install ) && echo \"memory_limit=1G\" > /etc/php${PHP_BUILD_VERSION}/conf.d/00_default.ini && echo \"max_input_vars=PHP_INT_MAX\" >> /etc/php${PHP_BUILD_VERSION}/conf.d/00_default.ini && echo \"opcache.enable_cli = 'On'\" >> /etc/php${PHP_BUILD_VERSION}/conf.d/00_opcache.ini && echo \"extension=swoole.so\" > /etc/php${PHP_BUILD_VERSION}/conf.d/50_swoole.ini && echo \"swoole.use_shortname = 'Off'\" >> /etc/php${PHP_BUILD_VERSION}/conf.d/50_swoole.ini && wget -nv -O /usr/local/bin/composer https://github.com/composer/composer/releases/download/${COMPOSER_VERSION}/composer.phar && chmod u+x /usr/local/bin/composer && apk del .build-deps && rm -rf /var/cache/apk/* /tmp/* /usr/share/man /usr/local/bin/php* && php -v && php -m && php --ri swoole && php --ri Zend\\ OPcache && composer && echo -e \"\\033[42;37m Build Completed :).\\033[0m\\n\"" did not complete successfully: exit code: 139

Build PHP 8.1 Alpine 3.17

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.19

Process completed with exit code 1.

Build PHP 8.1 Alpine 3.19

Process completed with exit code 1.

Build PHP 8.1 Alpine 3.18

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.20

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.22

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.21

Process completed with exit code 1.

Build PHP 8.3 Alpine 3.20

Process completed with exit code 1.

Build PHP 8.3 Alpine 3.21

Process completed with exit code 1.

Build PHP 8.4 Alpine 3.22

Process completed with exit code 1.

Build PHP 8.4 Alpine 3.21

Process completed with exit code 1.

Build PHP 8.3 Alpine 3.22

Process completed with exit code 1.

Build PHP 8.3 Alpine edge

Process completed with exit code 1.

Build PHP 8.2 Alpine 3.21 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_obhnxM7gaZJmn7lHzcsH7NvcEsw=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.2 Alpine 3.22 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_jA48O11JV3kBd7tADctQH4mLHzw=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.4 Alpine 3.21 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_jblpFvw4ELEy1C-LkpNpoJ1-OcM=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.4 Alpine 3.22 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_ggSgGmXYDhOs9LUv08jq_OjwbUQ=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.4 Alpine edge -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_mLUtB7Qiedx2JCBNKWYOExiK304=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.3 Alpine 3.20 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_-skxubHj7Av6fuJpHQCixDfMKr4=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.3 Alpine 3.22 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_Lv1YJU_qzvIoPdo_rUs9vaTPZTc=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.3 Alpine 3.21 -slim

buildx failed with: toomanyrequests: You have reached your pull rate limit as 'limingxinleo': dckr_jti_elEm51dgH1dfLdgV9REOutLGQuY=. You may increase the limit by upgrading. https://www.docker.com/increase-rate-limit

Build PHP 8.1 Alpine 3.16

Process completed with exit code 1.

Build PHP 8.4 Alpine edge

The run was canceled by @limingxinleo.

Build PHP 8.4 Alpine edge

The operation was canceled.

Build PHP 8.3 Alpine 3.19 -slim

The run was canceled by @limingxinleo.

Build PHP 8.3 Alpine 3.19 -slim

The operation was canceled.

Build PHP 8.2 Alpine 3.18 -slim

The run was canceled by @limingxinleo.