carte MKS tinyBEE non compatible

[Cdriko]

Bonjour
J'ai essayé d'installer le firmware marlin/braillerap LA CARTE MAKERBASE TINYBEE v1
sans succès : ce firmware ne connais pas la tinybee.
Pourtant la doc annonce cette carte comme compatible : "Une carte MKS TinyBee (ESP32) et 2 drivers TMC2209 https://github.com/makerbase-mks" est écrit ici

J'ai essayé de modifier le Marlin officiel de mks pour le rendre compatible avec le logiciel d'embossage sans succès. il n'a pas l'air de vouloir de la vitesse de connexion à 250000. De plus la configuration des Gcodes M3 M4 eest compliquée par la nouvelle architechture.

quuelqu'un at-il un code qui fonctionne sur cette plateforme ?

merci

[crocsg]

Bonjour,
pour la MKS TinyBee il faut prendre le firmware marlin2 https://github.com/braillerap/MarlinBraille2, la configuration pour la tinybee est ici https://github.com/braillerap/MarlinBraille2Configuration
Ce n'est pas le firmware le plus facile a installer, c'est pour ca que la doc n'est pas au top

[Cdriko]

Merci de ton aide. J'ai récupéré Marlin 2 et copié les fichiers de configs pour la tinybee mais la compilation plante :

Marlin/src/inc/Warnings.cpp:59:4: warning: #warning "Warning! Don't use dummy thermistors (998/999) for final build!" [-Wcpp]
   #warning "Warning! Don't use dummy thermistors (998/999) for final build!"
    ^
Marlin/src/inc/Warnings.cpp:63:4: warning: #warning "Your Configuration provides no method to acquire user feedback!" [-Wcpp]
   #warning "Your Configuration provides no method to acquire user feedback!"
    ^
cc1plus: warning: unrecognized command line option '-Wno-register'
Marlin/src/module/motion.cpp: In function 'void homeaxis_paperload(AxisEnum)':
Marlin/src/module/motion.cpp:2298:7: warning: variable 'ends' set but not used [-Wunused-but-set-variable]
   int ends = Endstops::Endstops::state();
       ^
Marlin/src/module/motion.cpp:2318:13: warning: unused variable 'axis_home_dir' [-Wunused-variable]
   const int axis_home_dir =  home_dir(axis);
             ^
At global scope:
cc1plus: warning: unrecognized command line option '-Wno-register'
Marlin/src/module/temperature.cpp:2741:34: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas]
   #pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
                                  ^
Marlin/src/module/temperature.cpp: In static member function 'static void Temperature::isr()':
Marlin/src/module/temperature.cpp:3600:36: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas]
     #pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
                                    ^
At global scope:
cc1plus: warning: unrecognized command line option '-Wno-register'
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncPrinter.h:51:0,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncPrinter.cpp:51:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:73:4: error: #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
   #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
    ^
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:104:0:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:73:4: error: #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
   #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
    ^
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W_buffer.h:60:0,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W_buffer.cpp:58:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:73:4: error: #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
   #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
    ^
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.cpp:53:0:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:73:4: error: #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
   #error For RASPBERRY_PI_PICO_W board using CYW43439 WiFi only
    ^
In file included from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/lwip/lwip/opt.h:51:0,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/lwip/lwip/ip_addr.h:40,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/tcpip_adapter/tcpip_adapter.h:45,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/esp32/esp_event_legacy.h:23,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/esp_event/esp_event.h:26,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/esp32/esp_event_loop.h:22,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFiGeneric.h:27,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFiSTA.h:28,
                 from /home/cedric/.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFi.h:32,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:84,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.cpp:53:
/home/cedric/.platformio/packages/framework-arduinoespressif32/tools/sdk/include/lwip/lwipopts.h:326:0: warning: "TCP_MSS" redefined
 #define TCP_MSS                         CONFIG_TCP_MSS
 ^
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.h:60:0,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.cpp:52:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/async_config.h:35:0: note: this is the location of the previous definition
   #define TCP_MSS       MBED_CONF_LWIP_TCP_MSS        //(1460)
 ^
cc1plus: warning: unrecognized command line option '-Wno-register'
*** [.pio/build/mks_tinybee/lib19b/AsyncTCP_RP2040W/AsyncPrinter.cpp.o] Error 1
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp: In member function 'bool AsyncClient::connect(IPAddress, uint16_t)':
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:331:8: error: 'ip_addr_t {aka struct ip_addr}' has no member named 'addr'
   addr.addr = ip;
        ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp: In member function 'bool AsyncClient::connect(const char*, uint16_t)':
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:390:42: error: 'ip_addr_t {aka struct ip_addr}' has no member named 'addr'
     returnValue = connect(IPAddress(addr.addr), port);
                                          ^
In file included from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.h:109:0,
                 from .pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:104:
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:393:73: error: 'ip_addr_t {aka struct ip_addr}' has no member named 'addr'
     ATCP_LOGDEBUG3("connect: dns_gethostbyname => IP =", IPAddress(addr.addr), ", returnValue = ", returnValue ? "TRUE" : "FALSE");
                                                                         ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W_Debug.h:87:128: note: in definition of macro 'ATCP_LOGDEBUG3'
 #define ATCP_LOGDEBUG3(x,y,z,w)  if(_ASYNCTCP_RP2040W_LOGLEVEL_>3) { ATCP_PRINT_MARK; ATCP_PRINT(x); ATCP_PRINT_SP; ATCP_PRINT(y); ATCP_PRINT_SP; ATCP_PRINT(z); ATCP_PRINT_SP; ATCP_PRINTLN(w); }
                                                                                                                                ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp: In member function 'bool AsyncClient::operator==(const AsyncClient&)':
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/AsyncTCP_RP2040W.cpp:468:66: error: 'ip_addr_t {aka struct ip_addr}' has no member named 'addr'
   return (_pcb != NULL && other._pcb != NULL && (_pcb->remote_ip.addr == other._pcb->remote_ip.addr) &&
                                                                  ^
compilation terminated due to -fmax-errors=5.
*** [.pio/build/mks_tinybee/lib19b/AsyncTCP_RP2040W/AsyncTCP_RP2040W.cpp.o] Error 1
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/async_config.h:35:25: error: 'MBED_CONF_LWIP_TCP_MSS' was not declared in this scope
   #define TCP_MSS       MBED_CONF_LWIP_TCP_MSS        //(1460)
                         ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.h:86:34: note: in expansion of macro 'TCP_MSS'
     SyncClient(size_t txBufLen = TCP_MSS);
                                  ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/async_config.h:35:25: error: 'MBED_CONF_LWIP_TCP_MSS' was not declared in this scope
   #define TCP_MSS       MBED_CONF_LWIP_TCP_MSS        //(1460)
                         ^
.pio/libdeps/mks_tinybee/AsyncTCP_RP2040W/src/SyncClient.h:87:55: note: in expansion of macro 'TCP_MSS'
     SyncClient(AsyncClient *client, size_t txBufLen = TCP_MSS);
                                                       ^
cc1plus: warning: unrecognized command line option '-Wno-register'
*** [.pio/build/mks_tinybee/lib19b/AsyncTCP_RP2040W/AsyncTCP_RP2040W_buffer.cpp.o] Error 1
cc1plus: warning: unrecognized command line option '-Wno-register'
*** [.pio/build/mks_tinybee/lib19b/AsyncTCP_RP2040W/SyncClient.cpp.o] Error 1
======================================================== [FAILED] Took 35.10 seconds ========================================================

Environment    Status    Duration
-------------  --------  ------------
mks_tinybee    FAILED    00:00:35.096
=================================================== 1 failed, 0 succeeded in 00:00:35.096 =================================================== ```

[crocsg]

Alors ce qui m'inquiète c'est que je vois des erreurs qui concernent LWIP sur le RP2040 et je ne vois pas trop le lien avec la tinybee. Je recharge le projet pour pouvoir le compiler et faire un diagnostique

[crocsg]

Je viens de le recompiler avec VS code + platform IO et le plugin autobuild marlin
marlin2 correspond à la branche BrailleRAP à jour
dans le repertoire marlin, j'ai remplacé les fichiers Configuration.h et Configuration_adv.h par les fichiers correspondants du repertoire mks_tinybee de https://github.com/braillerap/MarlinBraille2Configuration

la ca compile sans probleme :

Linking .pio\build\mks_tinybee\firmware.elf
Building .pio\build\mks_tinybee\firmware.bin
Retrieving maximum program size .pio\build\mks_tinybee\firmware.elf
Checking size .pio\build\mks_tinybee\firmware.elf

Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [==        ]  15.4% (used 50368 bytes from 327680 bytes)
Flash: [===       ]  29.1% (used 971220 bytes from 3342336 bytes)
esptool.py v3.0
=========================================================================== [SUCCESS] Took 220.98 seconds ===========================================================================
Environment    Status    Duration
-------------  --------  ------------
mks_tinybee    SUCCESS   00:03:40.978
============================================================================ 1 succeeded in 00:03:40.978 ============================================================================

Quelle configuration tu utilise pour compiler ? il doit y avoir un probleme de version de bibliotheque ou de configuration vs code quelque part. en démarrage de compilation j'ai ca :
`
PS I:\home\braillraperework\tmp\revive_mks_tinybee\MarlinBraille2> platformio run -e mks_tinybee
Processing mks_tinybee (platform: espressif32@2.1.0; board: esp32dev; framework: arduino)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via '-v, --verbose' option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (2.1.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.10004.201016 (1.0.4)
• tool-esptoolpy @ 1.30000.201119 (3.0.0)
• toolchain-xtensa32 @ 2.50200.97 (5.2.0)
  Converting Marlin.ino
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 46 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- qr_encode @ 0.0.0+20201117144502
  |-- AsyncTCP @ 1.1.1
  |-- ESP Async WebServer @ 1.2.3
  |-- ESP3DLib @ 1.0.12
  |-- WebSockets @ 2.3.4
  |-- ESP32SSDP @ 1.1.1
  |-- SPI @ 1.0
  |-- EEPROM @ 1.0.3
  |-- ArduinoOTA @ 1.0
  |-- ESPmDNS @ 1.0
  |-- WiFi @ 1.0
  |-- FS @ 1.0
  |-- SPIFFS @ 1.0
  |-- Wire @ 1.0.1
  Building in release mode
  `

[Cdriko]

Merci de ton retour rapide.
C'est possible qu'il yai un problème de config mais je ne le détecte pas . J'utilise aussi l'extension Marlin build.

voici ma config et le retour de compilation.
platformio.zip

platformio_run.log

[crocsg]

j'ai trouvé d'ou ca vient, en cleanant le projet avec plateformio, plateformio à mis l'ensemble des bibliothèques à jour. Et du coup je tombe sur le même problème. Il n'y a plus qu'à trouver la solution. je regarde ca

[crocsg]

j'ai un début de solution, le probleme vient de la bibiliotheque AsyncTCP_RP2040W qui est installée automatiquement, il faut la supprimer, après sa compile

j'essaye de comprendre pourquoi cette librairies arrive la, ce n'est pas normal

[crocsg]

Cela repond au problème ?

[Cdriko]

Merci effectivement, ça a réglé le problème.

[crocsg]

Il y a manifestement un problème de dépendances avec AsyncTCP sur esp32, j'essaye de voir comment résoudre le problème.

[noreyni920]

Bonjour,
je suis ousmane le collégue de Cedric j'ai supprimé la bibiliotheque AsyncTCP_RP2040W mais le probléme persiste tjrs avec la compilation

fablab@fablab-Precision-3630-Tower:~/Documents/MarlinBraille2$ platformio run -e mks_tinybee
Processing mks_tinybee (platform: espressif32@2.1.0; board: esp32dev; framework: arduino)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (2.1.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-arduinoespressif32 @ 3.10004.210126 (1.0.4) 
 - tool-esptoolpy @ 1.30000.201119 (3.0.0) 
 - toolchain-xtensa32 @ 2.50200.97 (5.2.0)
Converting Marlin.ino
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 33 compatible libraries
Scanning dependencies...
Dependency Graph
|-- qr_encode @ 0.0.0+20201117144502
|-- AsyncTCP @ 3.4.0
|-- ESP Async WebServer @ 3.0.6
|-- ESP3DLib @ 1.0.12
|-- WebSockets @ 2.3.4
|-- ESP32SSDP @ 1.1.1
|-- SPI @ 1.0
|-- EEPROM @ 1.0.3
|-- ArduinoOTA @ 1.0
|-- ESPmDNS @ 1.0
|-- WiFi @ 1.0
|-- FS @ 1.0
|-- SPIFFS @ 1.0
|-- Wire @ 1.0.1
Building in release mode
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/FlushableHardwareSerial.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/HAL.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/HAL_SPI.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/Servo.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/Tone.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/WebSocketSerial.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/eeprom.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/i2s.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/ota.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/spiffs.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/timers.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/u8g_esp32_spi.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/web.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/ESP32/wifi.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/Delay.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/HAL.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/MinSerial.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/eeprom_api.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/esp_wifi.cpp.o
Compiling .pio/build/mks_tinybee/src/src/HAL/shared/servo.cpp.o
Compiling .pio/build/mks_tinybee/src/src/MarlinCore.cpp.o
`
Compiling .pio/build/mks_tinybee/src/src/core/serial.cpp.o
Compiling .pio/build/mks_tinybee/src/src/core/utility.cpp.o
Compiling .pio/build/mks_tinybee/src/src/feature/spindle_laser.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/calibrate/G28.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M200-M205.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M220.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M221.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M301.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M302.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M309.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/config/M92.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M108_M112_M410.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M111.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M120_M121.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M17_M18_M84.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M211.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M3-M5.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M400.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M80_M81.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M85.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M993_M994.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M997.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/M999.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/control/T.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/eeprom/M500-M504.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/feature/digipot/M907-M910.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/gcode.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/gcode_d.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/geometry/G92.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/geometry/M206_M428.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M110.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M113.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M114.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M115.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M118.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/host/M119.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/lcd/M145.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/motion/G0_G1.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/motion/G4.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/parser.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/queue.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/stats/M31.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/stats/M75-M78.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M104_M109.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M105.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M106_M107.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M140_M190.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M141_M191.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M155.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/temp/M303.cpp.o
Compiling .pio/build/mks_tinybee/src/src/gcode/units/M82_M83.cpp.o
Compiling .pio/build/mks_tinybee/src/src/inc/Warnings.cpp.o
Compiling .pio/build/mks_tinybee/src/src/lcd/extui/ui_api.cpp.o
Compiling .pio/build/mks_tinybee/src/src/lcd/fontutils.cpp.o
Compiling .pio/build/mks_tinybee/src/src/lcd/marlinui.cpp.o
Marlin/src/inc/Warnings.cpp:59:4: warning: #warning "Warning! Don't use dummy thermistors (998/999) for final build!" [-Wcpp]
   #warning "Warning! Don't use dummy thermistors (998/999) for final build!"
    ^
Marlin/src/inc/Warnings.cpp:63:4: warning: #warning "Your Configuration provides no method to acquire user feedback!" [-Wcpp]
   #warning "Your Configuration provides no method to acquire user feedback!"
    ^
Compiling .pio/build/mks_tinybee/src/src/libs/buzzer.cpp.o
Compiling .pio/build/mks_tinybee/src/src/libs/crc16.cpp.o
Compiling .pio/build/mks_tinybee/src/src/libs/numtostr.cpp.o
cc1plus: warning: unrecognized command line option '-Wno-register'
Compiling .pio/build/mks_tinybee/src/src/libs/stopwatch.cpp.o
Compiling .pio/build/mks_tinybee/src/src/libs/vector_3.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/endstops.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/motion.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/planner.cpp.o
Marlin/src/module/motion.cpp: In function 'void homeaxis_paperload(AxisEnum)':
Marlin/src/module/motion.cpp:2298:7: warning: variable 'ends' set but not used [-Wunused-but-set-variable]
   int ends = Endstops::Endstops::state();
       ^
Marlin/src/module/motion.cpp:2318:13: warning: unused variable 'axis_home_dir' [-Wunused-variable]
   const int axis_home_dir =  home_dir(axis);
             ^
Compiling .pio/build/mks_tinybee/src/src/module/settings.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/stepper.cpp.o
At global scope:
cc1plus: warning: unrecognized command line option '-Wno-register'
Compiling .pio/build/mks_tinybee/src/src/module/stepper/indirection.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/temperature.cpp.o
Compiling .pio/build/mks_tinybee/src/src/module/tool_change.cpp.o
Generating partitions .pio/build/mks_tinybee/partitions.bin
Compiling .pio/build/mks_tinybee/libdf0/QRCode/QR_Encode.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/bitstream.c.o
Marlin/src/module/temperature.cpp:2741:34: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas]
   #pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
                                  ^
Marlin/src/module/temperature.cpp: In static member function 'static void Temperature::isr()':
Marlin/src/module/temperature.cpp:3600:36: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas]
     #pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
                                    ^
Compiling .pio/build/mks_tinybee/libdf0/QRCode/mask.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/mmask.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/mqrspec.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/qrencode.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/qrinput.c.o
At global scope:
cc1plus: warning: unrecognized command line option '-Wno-register'
Compiling .pio/build/mks_tinybee/libdf0/QRCode/qrspec.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/rscode.c.o
Compiling .pio/build/mks_tinybee/libdf0/QRCode/split.c.o
Compiling .pio/build/mks_tinybee/lib62e/AsyncTCP/AsyncTCP.cpp.o
In file included from .pio/libdeps/mks_tinybee/AsyncTCP/src/AsyncTCP.cpp:4:0:
.pio/libdeps/mks_tinybee/AsyncTCP/src/AsyncTCP.h:10:29: fatal error: esp_idf_version.h: No such file or directory

*************************************************************************
* Looking for esp_idf_version.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_idf_version.h"
* Web  > https://registry.platformio.org/search?q=header:esp_idf_version.h
*
*************************************************************************

compilation terminated.
Compiling .pio/build/mks_tinybee/liba26/Async TCP/AsyncTCP.cpp.o
*** [.pio/build/mks_tinybee/lib62e/AsyncTCP/AsyncTCP.cpp.o] Error 1
====================================================================== [FAILED] Took 14.93 seconds ======================================================================

Environment    Status    Duration
-------------  --------  ------------
mks_tinybee    FAILED    00:00:14.926
================================================================= 1 failed, 0 succeeded in 00:00:14.926 =================================================================
fablab@fablab-Precision-3630-Tower:~/Documents/MarlinBraille2$ 

[crocsg]

Hum, there is some work on AsyncTCP with regular update that break compatibility. I will go back to LTS branch to fix it

[vmario89]

Hi. At https://braillerap-en.readthedocs.io/en/latest/bom.html MKS TinyBEE is listed to be compatible but at https://github.com/braillerap/BrailleRap/blob/master/README.md there it's not listed. I am curently deciding what to choose. Can you give me some advice? =)

[crocsg]

Hi @vmario89 actually we have some issue with network lib in dependencies, at this time i would recommend a MKS GEN-L

[noreyni920]

Bonjour,
j'ai compilé avec ce marlin(https://github.com/makerbase-mks/MKS-TinyBee/tree/main/firmware) sur VScode - plateformio et la compilation est passée quels sont les modifications à faire pour faire fonctionner l'imprimante braille ?