From 1d109bac8174a52bbf4b2e89114f31ac7ccaa356 Mon Sep 17 00:00:00 2001
From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com>
Date: Thu, 4 Sep 2025 13:25:45 +0200
Subject: [PATCH] Profile improvements PET-CF material. Reduced retraction
 length.

PP-659
---
 generic_petcf.xml.fdm_material         | 4 ++--
 ultimaker_petcf.xml.fdm_material       | 4 ++--
 ultimaker_petcf_black.xml.fdm_material | 4 ++--
 ultimaker_petcf_blue.xml.fdm_material  | 4 ++--
 ultimaker_petcf_gray.xml.fdm_material  | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/generic_petcf.xml.fdm_material b/generic_petcf.xml.fdm_material
index 3ff4ee20f..16d2a2463 100644
--- a/generic_petcf.xml.fdm_material
+++ b/generic_petcf.xml.fdm_material
@@ -10,7 +10,7 @@ Generic PET-CF profile. The data in this file may not be correct for your specif
             <color>Generic</color>
         </name>
         <GUID>64d44410-be10-428c-8891-f0ae47ea1734</GUID>
-        <version>31</version>
+        <version>32</version>
         <color_code>#888888</color_code>
         <description>Generic PET CF profile. The data in this file may not be correct for your specific machine.</description>
         <adhesion_info>Print on bare glass.</adhesion_info>
@@ -166,7 +166,7 @@ Generic PET-CF profile. The data in this file may not be correct for your specif
             <setting key="same material purge volume">51.04</setting>
             <setting key="purge speed coefficient">40</setting>
             <cura:setting key="material_flow">100</cura:setting>
-            <setting key="retraction amount">6</setting>
+            <setting key="retraction amount">4</setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_petcf.xml.fdm_material b/ultimaker_petcf.xml.fdm_material
index cd62abf67..1e91f9e00 100644
--- a/ultimaker_petcf.xml.fdm_material
+++ b/ultimaker_petcf.xml.fdm_material
@@ -8,7 +8,7 @@
             <label>Any color PET-CF</label>
         </name>
         <GUID>f0245d40-3657-4615-b9ab-19fc043944ca</GUID>
-        <version>14</version>
+        <version>15</version>
         <color_code>#888888</color_code>
         <description>Ultimaker PET-CF.</description>
         <adhesion_info>Print on bare glass.</adhesion_info>
@@ -167,7 +167,7 @@
             <setting key="same material purge volume">51.04</setting>
             <setting key="purge speed coefficient">40</setting>
             <cura:setting key="material_flow">100</cura:setting>
-            <setting key="retraction amount">6</setting>
+            <setting key="retraction amount">4</setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_petcf_black.xml.fdm_material b/ultimaker_petcf_black.xml.fdm_material
index 6178ef45b..c5d8ba895 100644
--- a/ultimaker_petcf_black.xml.fdm_material
+++ b/ultimaker_petcf_black.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Black</color>
         </name>
         <GUID>a6f8d4f1-7205-40cc-b9e5-3bad20bc8011</GUID>
-        <version>28</version>
+        <version>29</version>
         <color_code>#1e1e1e</color_code>
         <description>Ultimaker PET-CF.</description>
         <adhesion_info>Print on bare glass.</adhesion_info>
@@ -165,7 +165,7 @@
             <setting key="same material purge volume">51.04</setting>
             <setting key="purge speed coefficient">40</setting>
             <cura:setting key="material_flow">100</cura:setting>
-            <setting key="retraction amount">6</setting>
+            <setting key="retraction amount">4</setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_petcf_blue.xml.fdm_material b/ultimaker_petcf_blue.xml.fdm_material
index da8352a2f..ef13ac5ee 100644
--- a/ultimaker_petcf_blue.xml.fdm_material
+++ b/ultimaker_petcf_blue.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Blue</color>
         </name>
         <GUID>81555f45-354b-42e0-bc0d-e0357cb56dd4</GUID>
-        <version>28</version>
+        <version>29</version>
         <color_code>#025669</color_code>
         <description>Ultimaker PET-CF.</description>
         <adhesion_info>Print on bare glass.</adhesion_info>
@@ -165,7 +165,7 @@
             <setting key="same material purge volume">51.04</setting>
             <setting key="purge speed coefficient">40</setting>
             <cura:setting key="material_flow">100</cura:setting>
-            <setting key="retraction amount">6</setting>
+            <setting key="retraction amount">4</setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>
             </hotend>
diff --git a/ultimaker_petcf_gray.xml.fdm_material b/ultimaker_petcf_gray.xml.fdm_material
index cc7912758..85778e7c2 100644
--- a/ultimaker_petcf_gray.xml.fdm_material
+++ b/ultimaker_petcf_gray.xml.fdm_material
@@ -7,7 +7,7 @@
             <color>Gray</color>
         </name>
         <GUID>98896281-3972-4dc5-8d6d-76ed417b10ea</GUID>
-        <version>28</version>
+        <version>29</version>
         <color_code>#8d948d</color_code>
         <description>Ultimaker PET-CF.</description>
         <adhesion_info>Print on bare glass.</adhesion_info>
@@ -165,7 +165,7 @@
             <setting key="same material purge volume">51.04</setting>
             <setting key="purge speed coefficient">40</setting>
             <cura:setting key="material_flow">100</cura:setting>
-            <setting key="retraction amount">6</setting>
+            <setting key="retraction amount">4</setting>
             <hotend id="AA 0.25">
                 <setting key="hardware compatible">no</setting>
             </hotend>